Effects of (Li0.5Sm0.5)/W co-substitution and sintering temperature on the structure and electrical properties of ultrahigh Curie temperature piezoceramics,Ca0.92(Li0.5Sm0.5)0.08Bi2Nb2-xWxO9

With co-substitution of (Li_0.5Sm_0.5) at A site and W at B site, the electrical properties of modified Ca_0.92(Li_0.5Sm_0.5)_0.08Bi₂Nb_2-xW_xO₉ [(CLS)BN-xW, x = 0, 0.015 and 0.03] piezoceramics with ultrahigh Curie temperature (T_C) of > 930 °C were enhanced dramatically. The increased resistivity induced by the co-substitution ensure them to be polarized under an enough high field. Combined with the increase of spontaneous ferroelectric polarization (P_S), the significant enhancements in the piezoelectric, dielectric and ferroelectric properties can be obtained in the composition x = 0.015. Furthermore, the piezoelectric activity (d₃₃) and bulk resistivity (ρ_b) of (CLS)BN-0.015 W can be further enhanced at an appropriate sintering temperature. This optimum composition sintered at 1170 °C shows ultrahigh T_C of ～948 °C, d₃₃ of ～17.3 pC/N and ρ_b of ～6.9 MΩ cm at 600 °C, which are comparable to those of the reported high-temperature Aurivillius piezoceramics with T_C > 850 °C.     

煤泥燃烧过程中汞的迁移行为研究

采用在线汞测试方法，以山西省低热值煤电厂中掺烧的煤泥为研究对象，利用实验室小型流化床，研究煤泥中汞的热转化行为差异及共性特征、影响煤泥热转化过程中汞迁移的关键因素，以揭示煤泥热转化过程中汞污染物的迁移机理。结果表明，同一种煤泥，相同气氛，800、900、1 000 ℃下，燃烧温度对煤泥中的汞的释放比例没有变化；相同温度，汞的释放比例为氮气>空气>氧气。3种煤泥在相同燃烧条件下，汞的释放特征相似，元素汞的释放量和释放比例差异较大。释放量与煤泥中的汞含量正相关，释放比例与煤泥中汞的赋存形态有一定关系。     

Characteristic tryptic peptides and gelling properties of porcine skin gelatin affected by thermal action

Thermal action in extraction process had effects on characteristic tryptic peptides identification and gelling properties of porcine gelatin. SDS-PAGE, HPLC-LTQ/Orbitrap high-resolution mass spectrometry, texture analyser and rheometer were used to evaluate collagen depolymerisation degree, characteristic tryptic peptides and gelling properties of gelatins prepared in various thermal actions. Results showed that with increasing temperature and time, depolymerisation degree enlarged, while gel strength, gelling and melting temperature decreased. Mass spectra showed that 47 and 49 common characteristic tryptic peptides were identified in gelatins extracted at 50 °C and 100 °C with various times, respectively. Moreover, 34 common characteristic tryptic peptides were identified in all gelatin samples. Further comparison between this work and our previous investigations yielded 20 common characteristic tryptic peptides, which stably exist in various thermal actions. These common characteristic tryptic peptides may be very helpful for the accurate authentication of porcine gelatin.     

Effects of Agaricus bisporus on gel properties of chicken myofibrillar protein

The gel-forming ability of myofibrillar protein (MP) is highly correlated with the characteristics of emulsified meat products. Incorporation of Agaricus bisporus (Ab) powder into MP gels may enhance its gel properties to facilitate the development of a novel and safe meat product. Therefore, this study investigated the effects of Ab powder on gel strength, water holding capacity (WHC), texture, rheological behaviour, LF-NMR spin–spin relaxation (T₂), microstructure and protein secondary structure of the MP gel system. The results indicated that the gel strength, WHC, G' value and G" value were significantly improved when the addition of Ab powder increased from 0% to 6% (P < 0.05). Meanwhile, the T₂ relaxation time was shortened, and free water was transformed into immobilised water. The texture of the gel was improved when 1%–4% Ab powder was added compared to the control. Furthermore, Ab filled in the gel network and promoted the unfolding of MP α-helix and the formation of MP β-sheet during the thermal denaturation of MP, leading to a dense aggregated network structure. The study suggested that Ab could be a promising ingredient in improving chicken MP's gel properties and developing fat-reduced meat products.     

南方地区造纸车间钢屋面保温厚度的计算与分析

本文从内表面防结露、夏季隔热2个角度出发，对夏热冬冷及夏热冬暖地区代表城市采用的钢结构屋面的保温（隔热）层厚度进行计算分析。研究表明，在夏季室内温、湿度达到某一状态时，隔热厚度要大于冬季防结露的保温厚度。因此，夏热冬冷地区的造纸车间钢屋面保温层厚度应按夏季隔热计算确定，并进行冬季防结露验算；夏热冬暖地区按照冬季防结露计算即可。     

Structure,magnetic properties and microwave absorption properties of NdFe1-xNixO3

In this paper, a high-purity NdFe_1-xNi_xO₃ perovskite-type material was prepared by a simple sol method. At the same time, adjust the substitution content of nickel to achieve the purpose of adjusting the dielectric properties and magnetic properties. According to the respective instruments, as Ni is substituted into the NdFeO₃, the crystal microstructure will change to a certain extent, and there is a certain causal relationship between the magnetic properties and the bonding. Therefore, by adding a certain amount of nickel, the dielectric properties and magnetic properties can be adjusted to a certain balance point. NdFe_1-xNi_xO₃ material has excellent microwave absorption performance. When x = 0.2, the minimum reflection loss value is ?49.32, and the corresponding impedance matching value is 1, and the effective bandwidth is 2.2 GHz when the thickness is 5.0 mm. The material that adjusts the perovskite structure by Ni element is beneficial to make the microwave absorption peak move from high frequency to low frequency, which has a wider application range and is closer to civil, commercial, military and aerospace.     

Microstructural refinement and mechanical response of Al2O3–ZrO2 eutectics fabricated by a novel pulse discharge plasma assisted melting method

In the present work, microstructural refinement and mechanical response of Al₂O₃–ZrO₂ eutectics fabricated by a pulse discharge plasma assisted melting (PDPAM) method were investigated. The solidified microstructure evolves from polygonal eutectic colonies into irregular cellular colonies with increasing the superheating temperature of the melt from 1820 °C to 1900 °C. The average eutectic spacing inside the colonies decreases from 1.80 ± 0.10 μm to 0.25 ± 0.06 μm, and the coarse inter-colonial structure is refined, which is attributed to the increase in undercooling temperature. High-temperature microstructural stability of Al₂O₃–ZrO₂ eutectics is improved significantly as contrasted with the as-sintered ceramics. Besides, the load dependence of Vickers hardness for Al₂O₃–ZrO₂ eutectics is investigated.     

Microstructure and mechanical properties of 3D-printed nano-silica reinforced alumina cores

Ceramic cores are an important component in the preparation of hollow turbine blades for aero-engines. Compared with traditional hot injection technology, 3D printing technology overcomes the disadvantages of a long production cycle and the difficulty in producing highly complex ceramic cores. The ceramic cores of hollow turbine blades require a high bending strength at high temperatures, and nano-mineralizers greatly improve their strength. In this study, nano-silica-reinforced alumina-based ceramic cores were prepared, and the effects of nanopowder content on the microstructure and properties of the ceramic cores were investigated. Alumina-based ceramic cores contained with nano-silica were prepared using the vat photopolymerization 3D printing technique and sintered at 1500 °C. The results showed that the linear shrinkage of ceramic cores first increased and then decreased as the nano-silica powder content increased, and the bending strength showed the same trend. The fracture mode changed from intergranular to transgranular. The open porosity and bulk density fluctuated slightly. The weight loss rate was approximately 20%. When the nano-silica content was 3%, the bending strength reached a maximum of 46.2 MPa and 26.1 MPa at 25 °C and 1500 °C, respectively. The precipitation of the glass phase, change in the fracture mode of the material, pinning crack of nanoparticles, and reduction of fracture energy due to the interlocking of cracks, were the main reasons for material strengthening. The successful preparation of 3D printed nano-silica reinforced alumina-based ceramic cores is expected to promote the preparation of high-performance ceramic cores with complex structures of hollow turbine blades.     

Grain orientation evolution and multi-scale interfaces enhanced thermoelectric properties of textured Sr0.9La0.1TiO3 based ceramics

Sr_0.9La_0.1TiO₃ based textured ceramics (SLTT-S3T) with a texture fraction of 0.81 are successfully fabricated by the reactive template grain growth method, in which Sr_0.9La_0.1TiO₃/20 wt%Ti was used as matrix and 10 wt% plate-like Sr₃Ti₂O₇ template seeds were used as templates. The phase transition, microstructure evolution, and the anisotropic thermoelectric properties of SLTT-S3T ceramics were investigated. The results show that the ceramics are mainly composed of Sr_0.9La_0.1TiO₃ and rutile TiO₂ phases. Grains grow with a preferred orientation along (h00). A maximum ZT of 0.26 at 1073 K was achieved in the direction perpendicular to the tape casting direction. The low lattice thermal conductivity of 1.9 W/(m K) at 1073 K was obtained decreased by 34%, 40%, and 38% compared with non-textured, SrTiO₃ and Sr_0.9La_0.1TiO₃ ceramics prepared by the same process, can be attributed to the enhanced phonon scattering by the complex multi-scale boundaries and interfaces. This work provides a strategy of microstructural design for thermoelectric oxides to decrease intrinsic lattice thermal conductivity and further regulate thermoelectric properties via texture engineering.